View MBF9045BB_1011647.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FEDW9045BB-01
1 Semiconductor MBF9045BB
SAW Antenna Duplexer (700 to 1000 MHz)
This version: Sep. 2001
GENERAL DESCRIPTION
The MBF9045BB is the SAW antenna duplexer for the frequency range of 700 to 1000 MHz. This SAW Duplexer integrates RF filters at Tx and Rx side, and matching circuit into PKG. This helps to save the space and weight greatly in the target application such as mobile telephone. This SAW Duplexer has very low insertion loss by using high quality package. Due to high harmonics characteristics, total number of components at RF circuit can be minimized. Thanks to high isolation performance, high sensitivity can be expected. Low insertion loss at Tx saves the power consumption of mobile telephone which prolong the battery life.
FEATURES
* Complying Standard AMPS, IS-95, IS-136 * Small package: 5mm x 5mm & less than 1.8 mm in height * PKG I/O Impedance: 50
PRODUCT DESCRIPTION
Package Type MBF9045BB
Rx
45B
Y XX X
ANT Tx
Construction
Glue
Cap
Wire Chip Package Die Paste
Cross-section of MBF9045BB
1/10
FEDW9045BB-01
1 Semiconductor
MBF9045BB
PIN ASSIGNMENT & DESCRIPTION
9
8
7
10 11 12
45B
YXXX
1 1 2 2 3 3
6 5 4
Top view
10 11 12 13
4 5 6
Bottom view
9
8
7
CONNECTION 2: ANT (Antenna Pin) 5: Tx (Transmitting Terminal Pin) 11: Rx (Receiving Terminal Pin) 13: INDEX Mark (should not be soldered ) Others: GND (Ground Pin)
2/10
FEDW9045BB-01
1 Semiconductor
MBF9045BB
ABSOLUTE MAXIMUM RATINGS
Parameter Operating Temperature Storage Temperature Maximum Input Power Symbol Ta TSTG PIN Rating Min. -30 -40 -- Max. +85 +85 1.2 Unit C C W
RECOMMENDED OPERATING CONDITIONS
Parameter Operating Temperature Symbol Ta Rating Min. -30 Max. +85 Unit C
3/10
FEDW9045BB-01
1 Semiconductor
MBF9045BB
ELECTRICAL CHARACTERISTICS
Parameter Tx Antenna a) b) c) d) Insertion loss Passband ripple VSWR Absolute attenuation 824 to 849 MHz 824 to 849 MHz 824 to 849 MHz 869 to 894 MHz 1648 to 1698 MHz 869 to 894 MHz 869 to 894 MHz 869 to 894 MHz 779 to 804 MHz 824 to 849 MHz d) Absolute attenuation 979 to 1004 MHz 1088 to 1113 MHz 1648 to 1698 MHz 2472 to 2547 MHz Isolation TX RX a) Absolute attenuation 824 to 849 MHz 869 to 894 MHz -- 53 46 -- 57 49 -- -- -- 1.2 dB dB W -- -- -- 40 10 -- -- -- 30 50 30 30 30 20 2.0 0.7 1.7 45 16 3.4 1.0 2.1 -- 53 -- -- -- -- 2.5 1.5 2.0 -- -- 3.8 2.0 2.5 -- -- -- -- -- -- dB dB dB dB dB dB dB dB dB dB dB dB Condition Mini. Typ. (Ta = -30 to +85C) Max. Unit/Notes
Antenna Rx a) b) c) Insertion loss Passband ripple VSWR
Input Power a) Average power
Note: Electrical characteristics described above is guaranteed by the following measurement and equipment condition. 1) Test board: See next page 2) Network analyzer: ADVANTEST R3767CH with 3 port test adapter (R3966K) or R3767CG
4/10
FEDW9045BB-01
1 Semiconductor
MBF9045BB
Test Board
22.60.1 20
16.60.1
7.4
1.0 0.8 1.0
6.4
0.6
2.3 0.5 1.3
1.80
0.8 0.5
5/10
FEDW9045BB-01
1 Semiconductor
MBF9045BB
MARKING
Part Symbol
45B
YXXX
Lot Number
Antenna Index
Note) Lot Number Y: XXX:
Last number of year Serial number
6/10
FEDW9045BB-01
1 Semiconductor
MBF9045BB
REFLOW TEMPERATURE PROFILE The figure below shows recommended temperature profile of infrared reflow and air reflow. Other type of reflow is not recommended. The maximum reflow count is 2 times. Washing of this device after reflow process is prohibited.
250 1 to 4C/sec. Package surface Temperature (C) 200 Preheat temperature: 120 to 150C 150 20 sec.max
235 to 240C, 20 sec. max.
1 to 4C/sec.
40 to 60 sec. 100
50
2 to 5C/sec.
Time (sec.)
7/10
FEDW9045BB-01
1 Semiconductor
MBF9045BB
PACKAGE DIMENTION
Unit: mm General tolerance: 0.15
5.0 9 8
+0.2 7
+0.2
10 11 12
5.0
45B
YXXX
1 2 3
6 5 4
+0.1 1.7
1.27 1.27 1 2 3 10 1.27 1.27 0.97 4 0.6 5 12 6 0.6 9 8 7 0.6 11
0.6*
*: Pin No.2,5,11 only
8/10
FEDW9045BB-01
1 Semiconductor
MBF9045BB
RECOMMENDATION FOR SOLDER PAD PATTERN The solder pad pattern should be designed by customers because it depends on the electrical performance of the customers' system. Following is an example of solder pad pattern which is used in OKI's package evaluation board. Please be noted that this is for reference purpose only.
25 m 0.1 mm
0.1 mm 25 m 0.5 mm 0.1 mm
PCB pad pattern
Metal mask pattern
Pad of Device
Please pay attention to the following items to maintain electrical performance. (1) Metal mask pattern for cream solder should be 25 m smaller on each side. Metal mask is 0.15 mm in thickness. (2) As the impedance of Tx, Rx, ANT is designed for 50, please consider this for the design of mother board.
9/10
FEDW9045BB-01
1 Semiconductor
MBF9045BB
NOTICE 1. The information contained herein can change without notice owing to product and/or technical improvements. Before using the product, please make sure that the information being referred to is up-to-date. 2. The outline of action and examples for application circuits described herein have been chosen as an explanation for the standard action and performance of the product. When planning to use the product, please ensure that the external conditions are reflected in the actual circuit, assembly, and program designs. When designing your product, please use our product below the specified maximum ratings and within the specified operating ranges including, but not limited to, operating voltage, power dissipation, and operating temperature. Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or unusual physical or electrical stress including, but not limited to, exposure to parameters beyond the specified maximum ratings or operation outside the specified operating range. Neither indemnity against nor license of a third party's industrial and intellectual property right, etc. is granted by us in connection with the use of the product and/or the information and drawings contained herein. No responsibility is assumed by us for any infringement of a third party's right which may result from the use thereof. The products listed in this document are intended for use in general electronics equipment for commercial applications (e.g., office automation, communication equipment, measurement equipment, consumer electronics, etc.). These products are not authorized for use in any system or application that requires special or enhanced quality and reliability characteristics nor in any system or application where the failure of such system or application may result in the loss or damage of property, or death or injury to humans. Such applications include, but are not limited to, traffic and automotive equipment, safety devices, aerospace equipment, nuclear power control, medical equipment, and life-support systems. Certain products in this document may need government approval before they can be exported to particular countries. The purchaser assumes the responsibility of determining the legality of export of these products and will take appropriate and necessary steps at their own expense for these. No part of the contents contained herein may be reprinted or reproduced without our prior permission. Copyright 2001 Oki Electric Industry Co., Ltd.
3.
4.
5.
6.
7.
8.
10/10

▲Up To Search▲

Price & Availability of MBF9045BB

	To Download MBF9045BB Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .